Test sieving is specified in a number of national & international standards as an obligatory testing method for a wide variety of analytical and industrial processes. Most of these standards require the used sieves to comply with specific technical requirements outlined in dedicated sieving standards such as ISO 3310 or ASTM E11 / E 323. The following list provides an overview of the sieves required by various standards:

DIN ISO 35: Natural rubber latex concentrate – Determination of mechanical stability

• 180 µm

DIN EN 116: Diesel and domestic heating fuels – Determination of cold filter plugging point – Stepwise cooling bath method

• 45 µm

DIN EN ISO 119: Plastics – Phenol-formaldehyde mouldings – Determination of free phenols; Iodometric method

• 250 µm

DIN EN ISO 120: Plastics – Phenol-formaldehyde mouldings – Determination of free ammonia and ammonium compounds; Colorimetric comparison method

• 250 µm

DIN ISO 123: Rubber latex – Sampling

• 180 µm

DIN EN ISO 182: Plastics; determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures – Part 2: pH method, Part 3: Conductometric method & Part 4: potentiometric method

• 1,40 mm
• 2,00 mm

DIN EN 196-1: Methods of testing cement – Part 1: Determination of strength

• 80 µm
• 160 µm
• 500 µm
• 1,00 mm
• 1,60 mm
• 2,00 mm

DIN EN 196-6: Methods of testing cement – Part 6: Determination of finenes

• 90 µm
• 2,00 mm

DIN EN 206: Concrete – Specification, performance, production and conformity

➡ Details & Sieve Specifications

Test Sieves for Aggregates in Concrete Production

DIN 459-2: Building material machines – Mixers for concrete and mortar – Part 2: Procedure for the examination of the mixing efficiency of concrete mixers

• 250 µm
• 500 µm
• 1,00 mm
• 2,00 mm
• 4,00 mm
• 8,00 mm
• 16,0 mm
• 22,4 mm
• 31,5 mm

DIN EN 459-2: Building lime – Part 2: Test methods

• 90 µm
• 200 µm
• 2,00 mm
• 5,00 mm
• 10,0 mm

DIN EN 615: Fire protection – Fire extinguishing media – Specifications for powders (other than class D powders)

• 40 µm
• 63 µm
• 125 µm
• 425 µm

DIN EN ISO 658: Oilseeds – Determination of content of impurities (ISO 658:2002)

• 0,5 mm Round
• 1,0 mm Round
• 2,0 mm Round

DIN ISO 706: Rubber latex – Determination of coagulum content (sieve residue) (ISO 706:2004)

• 180 µm

DIN EN ISO 712: Cereals and cereal products – Determination of moisture content – Part 1: Reference method

• 500 µm
• 1,00 mm
• 1,70 mm

DIN ISO 719: Glass – Hydrolytic resistance of glass grains at 98 °C – Method of test and classification

• 300 µm
• 500 µm
• 710 µm

DIN ISO 720: Glass – Hydrolytic resistance of glass grains at 121 °C – Method of test and classification

• 300 µm
• 425 µm
• 710 µm

DIN ISO 787-7: General methods of test for pigments and extenders – Part 7: Determination of residue on sieve – Water method – Manual procedure

• 45 µm or any other suitable opening size based on material properties

DIN ISO 787-10: General methods of test for pigments and extenders; part 10: determination of density; pyknometer method

• 500 µm

DIN 1045-2: Concrete, reinforced and prestressed concrete structures – Part 2: Concrete – Specification, properties, production and conformity – Application rules for DIN EN 206-1

➡ Details & Sieve Specifications

Test Sieves for Aggregates in Concrete Production

DIN EN 1015-1: Methods of test for mortar for masonry – Part 1: Determination of particle size distribution (by sieve analysis)

➡ Details & Sieve Specifications

Test Sieve Set for the Analysis of Masonry Mortar according to EN 1015

DIN EN 1097-2: Tests for mechanical and physical properties of aggregates – Part 2: Methods for the determination of resistance to fragmentation

• 200 µm
• 630 µm
• 1,60 mm
• 2,00 mm
• 5,00 mm
• 8,00 mm
• 10,0 mm
• 11,2 mm
• 12,5 mm
• 14,0 mm

DIN EN 1097-6: Tests for mechanical and physical properties of aggregates – Part 6: Determination of particle density and water absorption

• 63 µm
• 1,00 mm
• 2,00 mm
• 4,00 mm
• 31,5 mm
• 63,0 mm

DIN EN 1177: Impact attenuating playground surfacing – Methods of test for determination of impact attenuation

➡ Details & Sieve Specifications

Test Sieves for Particle Size Distribution Analysis in Aggregates

DIN EN 1235: Solid fertilizers – Test sieving (ISO 8397:1988, modified) (including Amendment A1:2003)

➡ Details & Sieve Specifications

Test Sieves for Quality Assessments of Solid Fertilizers

DIN EN 1269: Textile floor coverings – Assessment of impregnations in needled floor coverings by means of a soiling test

• 500 µm

DIN EN 1367-5: Tests for thermal and weathering properties of aggregates – Part 5: Determination of resistance to thermal shock

• 2,00 mm
• 5,00 mm

DIN EN 1367-8: Tests for thermal and weathering properties of aggregates – Part 8: Determination of resistance to disintegration of Lightweight Aggregates

• 8,00 mm
• 16,0 mm
• 31,5 mm

DIN EN 1424: Road marking materials – Premix glass beads

• 53 µm
• 90 µm
• 150 µm
• 250 µm
• 300 µm
• 355 µm
• 425 µm
• 600 µm
• 850 µm
• 1,00 mm
• 1,18 mm

DIN EN 1429: Bitumen and bituminous binders – Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving

• 160 µm
• 500 µm

DIN EN 1482: Fertilizers, liming materials and inhibitors – Sampling and sample preparation – Part 2: General sample preparation provisions

• 180 µm
• 500 µm
• 1,00 mm

DIN EN 1568: Fire extinguishing media – Foam concentrates – Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids, Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids, Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids & Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids

• 180 µm

DIN EN ISO 1598: Plastics – Cellulose acetate – Determination of insoluble particles

• 710 µm

DIN EN ISO 1599: Kunststoffe – Celluloseacetat – Bestimmung des Viskositätsverlustes beim Formen

• 710 µm

DIN EN ISO 1600: Plastics – Cellulose acetate – Determination of viscosity loss on moulding

• 710 µm

DIN EN ISO 1624: Plastics – Vinyl chloride homopolymer and copolymer resins – Sieve analysis in water

• 63 µm
• 250 µm
• additional opening sizes if necessitated by the material properties

DIN EN 1744-1: Tests for chemical properties of aggregates – Part 1: Chemical analysis

• 250 µm
• 300 µm
• 500 µm
• 2,0 mm
• 5,60 mm
• 8,00 mm
• 11,2 mm
• 16,0 mm (Perforated Plate Sieve)
• 22,4 mm

DIN EN 1744-7: Tests for chemical properties of aggregates – Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)

• 4,00 mm

DIN EN 1860-2: Appliances, solid fuels and firelighters for barbecuing – Part 2: Barbecue charcoal and barbecue charcoal briquettes – Requirements and test methods

• 200 µm
• 212 µm
• 10,0 mm Round
• 20,0 mm Round
• 80,0 mm Round
• 150,0 mm Round

DIN EN ISO 1927-3: Qualitative classification of softwood round timber – Part 3: Larches and Douglas fir

• 63 µm
• 125 µm
• 250 µm
• 500 µm
• 1,00 mm
• 2,00 mm
• 4,00 mm
• 8,00 mm
• 16,0 mm

DIN EN 1936: Natural stone test method – Determination of real density and apparent density, and of total and open porosity

• 63 µm

DIN 1989-2: Rainwater harvesting systems – Part 2: Filters

• 125 µm
• 250 µm

DIN EN 1997-2: Eurocode 7 – Geotechnical design – Part 2: Ground properties

• 63 µm
• 2,00 mm
• 5,00 mm
• 20,0 mm

DIN EN ISO 3093: Wheat, rye and their flours, durum wheat and durum wheat semolina – Determination of the falling number according to Hagberg-Perten

• 800 µm

DIN EN ISO 3549: Zinc dust pigments for paints – Specifications and test methods

• 45 µm
• 90 µm
• 125 µm

DIN EN 3875: Aerospace series – Metallic materials, Filler metal for brazing – Technical specification

• 45 µm
• 106 µm
• 125 µm

DIN 4030-2: Assessment of water, soil and gases for their aggressiveness to concrete – Part 2: Sampling and analysis of water and soil samples

• 90 µm
• 2,00 mm

DIN ISO 4497: Metallic powders; determination of particle size by dry sieving

➡ Details & Sieve Specifications

Test Sieves for Screening Analysis of Metal Powders

DIN ISO 4576: Plastics – Polymer dispersions – Determination of sieve residue (gross particle and coagulum content)

• 45 µm
• 63 µm
• 90 µm
• 125 µm
• 180 µm

DIN EN ISO 4610: Plastics – Vinyl chloride homopolymer and copolymer resins – Sieve analysis using air-jet sieve apparatus

• Sieve selection based on material properties

DIN 4924: Sands and gravels for well construction – Requirements and testing

• 315 µm
• 400 µm
• 710 µm
• 800 µm
• 1,00 mm
• 1,25 mm
• 1,60 mm
• 2,00 mm
• 2,50 mm
• 3,15 mm
• 4,00 mm
• 5,60 mm
• 8,00 mm
• 16,0 mm
• 31,5 mm
• 63,0 mm

DIN EN ISO 4934: Steel and iron – Determination of sulfur content – Gravimetric method

• 75 µm
• 150 µm

DIN EN ISO 5223: Test sieves for cereals

➡ Details & Sieve Specifications

Grain Sieves in Accordance with ISO 5223

DIN EN ISO 5370: Solid biofuels – Determination of fines content in pellets

• (500 µm)
• (1,00 mm)
• 3,15 mm Round
• 5,60 mm Round

DIN EN ISO 5529: Wheat – Determination of the sedimentation index – Zeleny test

• 150 µm

DIN ISO 5544: Caseins – Determination of “fixed ash” (Reference method)

• 500 µm

DIN ISO 5545: Rennet caseins and caseinates – Determination of ash (Reference method)

• 500 µm

DIN ISO 5546: Caseins and caseinates – Determination of pH (Reference method)

• 500 µm

DIN ISO 5550: Caseins and caseinates – Determination of moisture content (Reference method)

• 500 µm

DIN ISO 6106: Abrasive products – Checking the grain size of superabrasives

• Test Sieves with electroformed sheets (ISO 3310-3)
• 28 µm
• 32 µm
• 41 µm
• 49 µm
• 57 µm
• 65 µm
• 75 µm
• 85 µm
• 90 µm
• 97 µm
• 107 µm
• 116 µm
• 127 µm
• 139 µm
• 151 µm
• 165 µm
• 181 µm
• 197 µm
• 227 µm
• 255 µm
• 271 µm
• 302 µm
• 322 µm
• 360 µm
• 384 µm
• 425 µm
• 455 µm
• 505 µm
• 541 µm
• 600 µm
• 645 µm
• 710 µm
• 770 µm
• 850 µm
• 915 µm
• 1080 µm
• 1280 µm
• 1530 µm
• 1830 µm

DIN EN ISO 6179: Rubber, vulcanized or thermoplastic – Rubber sheets and rubber-coated fabrics – Determination of transmission rate of volatile liquids (gravimetric technique)

• 1,00 mm

DIN EN ISO 6427: Plastics – Determination of matter extractable by organic solvents (conventional methods)

• A suitable set of test sieves in accordance with ISO 565

DIN ISO 6745: Zinc phosphate pigments for paints – Specifications and methods of test

• 45 µm

DIN EN ISO 7301: Rice – Specification

• 1,40 mm Round

DIN EN ISO 8130-1: Coating powders – Part 1: Determination of particle size distribution by sieving

• 32 µm
• 38 µm
• 45 µm
• 53 µm
• 63 µm
• 75 µm
• 90 µm
• 106 µm
• 125 µm
• 150 µm
• 180 µm
• 212 µm
• 250 µm
• 300 µm

DIN EN ISO 8251: Anodisieren von Aluminium und Aluminiumlegierungen – Messung der Abriebfestigkeit von anodisch erzeugten Oxidschichten

• 45 µm

DIN ISO 8486-1: Schleifkörper aus gebundenem Schleifmittel – Bestimmung und Bezeichnung von Korngrößenverteilung – Teil 1: Makrokörnungen F4 bis F220

• 45 µm
• 53 µm
• 63 µm
• 75 µm
• 90 µm
• 106 µm
• 125 µm
• 150 µm
• 180 µm
• 212 µm
• 250 µm
• 300 µm
• 355 µm
• 425 µm
• 500 µm
• 600 µm
• 710 µm
• 850 µm
• 1,00 mm
• 1,18 mm
• 1,40 mm
• 1,70 mm
• 2,00 mm
• 2,36 mm
• 2,80 mm
• 3,35 mm
• 4,00 mm
• 4,75 mm
• 5,60 mm
• 6,70 mm
• 8,00 mm

DIN ISO 9022-6: Optics and photonics – Environmental test methods – Part 6: Dust

• 45 µm
• 71 µm
• 100 µm
• 140 µm

DIN EN ISO 9073-6: Nonwovens – Test methods – Part 6: Absorption

• 2,00 mm

DIN EN ISO 10082: Plastics – Phenolic resins – Classification and test methods

• 250 µm
• 1,00 mm

DIN EN ISO 10210: Plastics – Methods for the preparation of samples for biodegradation testing of plastic materials

• 125 µm
• 250 µm

DIN 10355: Milled cereal products – requirements, types and testing

• 160 µm
• 224 µm
• 315 µm
• 500 µm
• 800 µm

DIN V 10376: Analysis of tobacco and tobacco products – Determination of size of the fillers of cigars and cigarillos by means of sieve analysis

• 1,40 mm
• 1,80 mm
• 2,50 mm

DIN 10451: Determination of “fixed ash” of caseins; reference method

• 500 µm

DIN 10765: Analysis of coffee and coffee products – Determination of particle size of ground roasted coffee – Air-jet sieving method

• 40 µm
• 63 µm
• 100 µm
• 250 µm
• 500 µm
• 1,00 mm

DIN EN ISO 10769: Clay geosynthetic barriers – Determination of water absorption of bentonite

• 250 µm

DIN 10775: Analysis of coffee and coffee products – Determination of water-soluble extract – Method for roasted coffee

• 250 µm
• 630 µm

DIN 10806: Analysis of tea – Preparation of ground sample of defined dry matter content

• 500 µm

DIN EN ISO 10930: Soil quality – Measurement of the stability of soil aggregates subjected to the action of water

• 50 µm
• 100 µm
• 200 µm
• 500 µm
• 1,00 mm
• 2,00 mm
• 3,00 mm / 3,15 mm
• 5,00 mm

DIN EN ISO 11125-1: Preparation of steel substrates before application of paints and related products – Test methods for metallic blast-cleaning abrasives – Part 1: Sampling

➡ Details & Sieve Specifications

Test Sieves for Analysis of Blasting Media

DIN EN ISO 11126: Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives

DIN EN ISO 11127-1: Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 1: Sampling

➡ Details & Sieve Specifications

Test Sieves for Analysis of Blasting Media

DIN ISO 11277: Soil quality – Determination of particle size distribution in mineral soil material – Method by sieving and sedimentation

• 63 µm
• 150 µm
• 212 µm
• 300 µm
• 425 µm
• 600 µm
• 1,18 mm
• 2,00 mm
• 3,35 mm
• 5,00 mm
• 6,30 mm
• 10,0 mm
• 14,0 mm
• 20,0 mm
• 28,0 mm
• 37,5 mm
• 50,0 mm

DIN 11540: Peats for horticulture and landscape gardening – Properties, test methods, specifications

• 200 µm
• 500 µm
• 1,00 mm
• 2,00 mm
• 4,00 mm
• 10,0 mm
• 16,0 mm
• 31,5 mm

DIN ISO 11916: Soil quality – Determination of selected explosives and related compounds – Part 2: Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS)

• 2,00 mm

DIN EN 12039: Flexible sheets for waterproofing – Bitumen sheets for roof waterproofing – Determination of adhesion of granules

• 315 µm

DIN EN 12130: Feather and down – Test methods – Determination of the fill power (massic volume)

• 180 µm

DIN EN 12192-1: Products and systems for the protection and repair of concrete structures – Granulometry analysis – Part 1: Test method for dry components of premixed mortar

• 63 µm
• (90 µm)
• 125 µm
• 250 µm
• 500 µm
• 1,00 mm
• 2,00 mm
• 4,00 mm
• (5,60 mm)
• 8,00 mm

DIN EN 12350: Testing fresh concrete – Part 11: Self-compacting concrete – Sieve segregation test

• 5,00 mm

DIN EN 12485: Chemicals used for treatment of water intended for human consumption – Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime – Test methods

• 90 µm
• 600 µm
• 2,00 mm

DIN EN 12620: Aggregates for concrete; German and English version

➡ Details & Sieve Specifications

Test Sieves for Aggregates in Concrete Production

DIN EN ISO 12625-17: Tissue paper and tissue products – Part 17: Determination of disintegration in water

• 125 µm
• 12,5 mm Rundloch

DIN EN ISO 12677: Chemical analysis of refractory products by X-ray fluorescence (XRF) – Fused cast-bead method

• 100 µm

DIN EN 12697-2: Bituminous mixtures – Test methods – Part 2: Determination of particle size distribution

➡ Details & Sieve Specifications

Test Sieves for Aggregates in Concrete Production

DIN EN 12860: Gypsum based adhesives for gypsum blocks – Definitions, requirements and test methods

➡ Details & Sieve Specifications

Test Sieves for the Norm-Compliant Reference Check of Gypsum & Mortar

DIN EN 12878: Pigments for the colouring of building materials based on cement and/or lime – Specifications and methods of test

• 63 µm
• 90 µm
• 2,00 mm

DIN EN 12902: Products used for treatment of water intended for human consumption – Inorganic supporting and filtering materials – Methods of test

• 25 µm and up

DIN EN 12904: Products used for treatment of water intended for human consumption – Silica sand and silica gravel

• Ref. EN 12902

DIN EN 12946: Liming materials – Determination of the calcium content and magnesium content – Complexometric method

• 250 µm

DIN EN 12948: Liming materials – Determination of size distribution by dry and wet sieving

• Test Sieves selected from ISO 565 and conforming with ISO 3310-1 and 3310-2

DIN EN ISO 12956: Geotextiles and geotextile-related products – Determination of the characteristic opening size

• Test Sieves selected from ISO 565 and conforming with ISO 3310-1 and 3310-2

DIN EN 13040: Soil improvers and growing media – Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density

• 2,00 mm Round
• 20 mm
• 25 mm
• 40 mm

DIN EN 13043: Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas

➡ Details & Sieve Specifications

Test Sieves for Aggregate Products in Road Construction

DIN EN 13055: Lightweight aggregates

• Primary & Expansion Sets 1 & 2 (ref. DIN 12620)

DIN EN 13108-21: Bituminous mixtures – Material specifications – Part 21: Factory Production Control

• 63 µm
• 2,00 mm
• Characertistic Coarse Grain Sieve
• Characertistic Fine Grain Sieve

DIN EN 13139: Aggregates for mortar

• 63 µm
• 125 µm
• 250 µm
• 500 µm
• 1,00 mm
• 2,00 mm
• 4,00 mm
• 8,00 mm

DIN EN 13179: Tests for filler aggregate used in bituminous mixtures – Part 1: Delta ring and ball test

• 125 µm

DIN EN ISO 13196: Soil quality – Sreening soils for selected elements by energy-dipersive X-ray fluorescence spectrometry using a handheld or portable instrument

• 2,00 mm

DIN EN 13242: Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction

➡ Details & Sieve Specifications

Test Sieves for Aggregate Products in Road Construction

DIN EN 13279-1: Gypsum binders and gypsum plasters – Part 1: Definitions and requirements

➡ Details & Sieve Specifications

Test Sieves for the Norm-Compliant Reference Check of Gypsum & Mortar

DIN EN 13285: Unbound mixtures – Specifications

➡ Details & Sieve Specifications

Test Sieves for Aggregate Products in Road Construction

DIN EN 13286-2: Unbound and hydraulically bound mixtures – Part 2: Test methods for laboratory reference density and water content – Proctor compaction

• 16,0 mm
• 31,5 mm
• 45,0 mm
• 63,0 mm

DIN EN 13286-4: Unbound and hydraulically bound mixtures – Part 4: Test methods for laboratory reference density and water content – Vibrating hammer

• 20,0 mm
• 40,0 mm

DIN EN 13286-51: Unbound and hydraulically bound mixtures – Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction

• 22,4 mm
• 31,5 mm

DIN EN 13286-53: Unbound and hydraulically bound mixtures – Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression

• 11,2 mm
• 22,4 mm

DIN EN 13450: Aggregates for railway ballast

• 63 µm
• 500 µm
• 8,00 mm
• 16,0 mm
• 22,4 mm
• (25,0 mm)
• 31,5 mm
• 40,0 mm
• 50,0 mm
• 63,0 mm
• 80,0 mm

DIN EN 13639: Determination of total organic carbon in limestone

• 90 µm

DIN EN 13938: Explosives for civil uses – Propellants and rocket propellants – Part 2: Determination of resistance to electrostatic discharge

• 100 µm
• 160 µm
• 250 µm
• 400 µm
• 630 µm
• 1,00 mm
• 1,60 mm
• 2,50 mm

DIN EN 13963: Jointing materials for gypsum boards – Definitions, requirements and test methods

➡ Details & Sieve Specifications

Test Sieves for the Norm-Compliant Reference Check of Gypsum & Mortar

DIN EN 14016-2: Binders for magnesite screeds – Caustic magnesia and magnesium chloride – Part 2: Test methods

• 90 µm
• 1,25 mm

DIN EN 14243-2: Materials obtained from end of life tyres – Part 2: Granulates and powders – Methods for determining the particle size distributions and impurities, including free steel and free textile content

• 125 µm
• 180 µm

DIN EN ISO 14244: Oilseed meals – Determination of soluble proteins in potassium hydroxide solution

• 250 µm
• 500 µm

DIN EN ISO 14629: Fine ceramics (advanced ceramics, advanced technical ceramics) – Determination of flowability of ceramic powders

• 710 µm

DIN EN ISO 14673-1: Milk and milk products – Determination of nitrate and nitrite contents – Part 1: Method using cadmium reduction and spectrometry

• 500 µm

DIN EN ISO 14780: Solid biofuels – Sample preparation

• 250 µm
• 1,00 mm

DIN EN 14984: Liming materials – Determination of product effect on soil pH – Soil incubation method

• 1,00 mm
• 2,00 mm
• 4,00 mm
• 6,30 mm

DIN EN 14987: Plastics – Evaluation of disposability in waste water treatment plants – Test scheme for final acceptance and specifications

• 10,0 mm

DIN EN 15330-5: Surfaces for sport areas – Synthetic turf and textile sports surfaces – Part 5: Specification for infill materials

• 63 µm
• 125 µm
• 200 µm
• 250 µm
• 315 µm
• 500 µm
• 630 µm
• 800 µm
• 1,00 µm
• 1,25 µm
• 1,60 µm
• 2,00 mm
• 2,50 mm
• 3,15 mm
• 4,00 mm
• 5,00 mm
• 6,30 mm

DIN EN 15346: Plastics – Recycled plastics – Characterization of poly(vinyl chloride) (PVC) recyclates

• 250 µm
• 500 µm
• 850 µm
• 1,00 mm
• 2,00 mm
• 3,15 mm
• 4,00 mm
• 6,30 mm
• 8,00 mm
• 12,5 mm

DIN EN 15348: Plastics – Recycled plastics – Characterization of poly(ethylene terephthalate) (PET) recyclates

• 1,00 mm
• 2,00 mm
• 3,15 mm
• 4,00 mm
• 6,30 mm
• 8,00 mm
• 12,5 mm

DIN CEN/TR 15404: Solid recovered fuels – Methods for the determination of ash melting behaviour by using characteristic temperatures

• 75 µm

DIN EN 15415-1: Solid recovered fuels – Determination of particle size distribution – Part 1: Screen method for small dimension particles

• 200 µm
• 400 µm
• 800 µm
• 1,60 mm
• 3,15 mm
• 6,30 mm
• 12,5 mm
• 25,0 mm
• 50,0 mm
• 100 mm
• 125 mm

DIN EN 15428: Soil improvers and growing media – Determination of particle size distribution

• 1,00 mm
• 2,00 mm
• 4,00 mm
• 8,00 mm
• 16,0 mm
• 31,5 mm

DIN EN 15585: Cereals and cereal products – Durum wheat (T. durum Desf.) – Determination of percentage of mitadine grains and calculation of percentage of vitreous grains

• 1,9 x 20,0 mm Oblong

DIN EN 15587: Cereal and cereal products – Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.), triticale (Triticosecale Wittmack spp.) and feed barley (Hordeum vulgare L.)

• 1,0 x 20,0 mm Oblong Aperture
• 1,8 x 20,0 mm Oblong Aperture
• 1,9 x 20,0 mm Oblong Aperture
• 2,0 x 20,0 mm Oblong Aperture
• 2,2 x 20,0 mm Oblong Aperture
• 3,55 x 20,0 mm Oblong Aperture

DIN EN 15597: Winter maintenance equipment – Spreading and spraying machines – Part 2: Requirements for distribution and their test

• 125 µm
• 800 µm
• 1,60 mm
• 2,00 mm
• 3,15 mm
• 6,30 mm

DIN EN 15875: Characterization of waste – Static test for determination of acid potential and neutralisation potential of sulfidic waste

• 125 µm

DIN EN 15928: Fertilizers – Determination of the fineness of grinding (dry procedure)

• 160 µm
• 630 µm

DIN EN 16129: Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures

• 125 µm

DIN EN ISO 16282: Methods of test for dense shaped refractory products – Determination of resistance to abrasion at ambient temperature

• Test Sieve selection based on material properties

DIN CEN/TS 16305:2012-04;DIN SPEC 10786: Liming materials – Determination of the dust content of granular liming materials before and after simulated handling conditions

• 1,00 mm

DIN EN 16329: Diesel and domestic heating fuels – Determination of cold filter plugging point – Linear cooling bath method

• 45 µm

DIN EN 16378:  Cereals – Determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)

• 1,80 mm Round
• 4,60 mm Round

DIN EN 16455: Conservation of cultural heritage – Extraction and determination of soluble salts in natural stone and related materials used in and from cultural heritage

• Suitable set of test sieves in accordance with ISO 3310-1 and/or 3310-2

DIN EN 16502: Test method for the determination of the degree of soil acidity according to Baumann-Gully

• 2,00 mm

DIN EN 16811: Winter service equipment and products – De-icing agents – Part 1: Sodium chloride – Requirements and test methods

• 125 µm
• 800 µm
• 1,60 mm
• 2,00 mm
• 3,15 mm
• 5,00 mm
• 6,30 mm
• 10,0 mm
• 20,0 mm

DIN EN 16811: Winterdienstausrüstung – Enteisungsmittel – Teil 1: Natriumchlorid – Anforderungen und Prüfverfahren; Teil 2: Calcium- und Magnesiumchlorid – Anforderungen und Prüfverfahren;

• 125 µm
• 800 µm
• 1,60 mm
• 2,00 mm
• 3,15 mm
• 5,00 mm
• 6,30 mm
• 10,0 mm
• 20,0 mm

DIN EN ISO 16929: Plastics – Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test

• 2,00 mm
• 10,0 mm

DIN CEN/TS 17158: Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) – Determination of particle size of lignocellosic material

DIN EN ISO 17225: Solid biofuels – Fuel specifications and classes – Part 1: General requirements

➡ Details & Sieve Specifications

Specialty Sieves for Graded Wood Pellets (ISO 17225)

DIN EN 17542-2: Earthworks – Geotechnical laboratory tests – Part 2: Fragmentability test standard

• 1,00 mm
• 2,00 mm
• 5,00 mm
• 10,0 mm
• 16,0 mm
• 20,0 mm
• 40,0 mm
• 50,0 mm
• 63,0 mm
• 80,0 mm

DIN EN 17542-3: Earthworks – Geotechnical laboratory tests – Part 3: Methylene blue value VBS on soils and rocks

• 63 µm
• 5,00 mm
• 50,0 mm

DIN EN 17555-1: Aggregates for construction works – Part 1: Characteristics

• Set of sieves in accordance with EN 933-2

DIN EN 17685-1: Earthworks – Chemical tests – Part 1: Determination of loss on ignition

• 2,00 mm

DIN CEN/TS 17693-2: Earthworks – Soil treatment tests – Part 2: Test of evaluation of the aptitude of a dry material to emit dust

• 45 µm

DIN EN 17702-2: Plant biostimulants – Sampling and sample preparation – Part 2: Sample preparation

• 180 µm
• 500 µm
• 1,00 mm

DIN EN ISO 17827-1: Solid biofuels – Determination of particle size distribution for uncompressed fuels – Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above

• 63,0 mm
• 45,0 mm
• 16,0 mm
• 8,00 mm
• 3,15 mm Round

DIN EN ISO 17827-2: Solid biofuels – Determination of particle size distribution for uncompressed fuels – Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (formerly DIN EN 15149)

• 250 µm
• 500 µm
• 1,00 mm
• 1,40 mm
• 2,00 mm
• 2,80 mm
• 3,15 mm Round

DIN EN ISO 17829: Solid Biofuels – Determination of length and diameter of pellets

• 3,15 mm Round

DIN EN ISO 17831-1: Solid biofuels – Determination of mechanical durability of pellets and briquettes – Part 1: Pellets

• 3,15 mm Round

DIN EN ISO 17831-2: Solid biofuels – Determination of mechanical durability of pellets and briquettes – Part 2: Briquettes

• A suitable test sieve conforming with ISO 3310-1 and an opening size between 16 and 45 mm

DIN EN ISO 17892-4: Geotechnical investigation and testing – Laboratory testing of soil – Part 4: Determination of particle size distribution

• 38 µm
• 63 µm
• 125 µm
• 150 µm
• 212 µm
• 250 µm
• 300 µm
• 355 µm
• 425 µm
• 500 µm
• 600 µm
• 710 µm
• 1,18 mm
• 1,40 mm
• 2,00 mm
• 3,35 mm
• 4,00 mm
• 5,00 mm
• 5,60 mm
• 6,30 mm
• 8,00 mm
• 10,0 mm
• 11,2 mm
• 14,0 mm
• 16,0 mm
• 20,0 mm
• 22,4 mm
• 28,0 mm
• 31,5 mm
• 37,5 mm
• 45,0 mm
• 50,0 mm
• 63,0 mm

DIN EN 18003: Food authenticity – Determination of 16-O-Methylcafestol content of green and roasted coffee – HPLC-method

• 250 µm
• 630 µm

DIN 18035-7: Sports grounds – Part 7: Synthetic turf areas

➡ Details & Sieve Specifications

Test Sieves for Particle Size Distribution Analysis in Aggregates

DIN 18123: Baugrund, Untersuchung von Bodenproben – Bestimmung der Korngrößenverteilung (Retracted)

➡ Details & Sieve Specifications

Test Sieves for Gradation Analysis of Soils

DIN 18127: Soil, investigation and testing – Proctor-test

• 20,0 mm Perforated Plate Sieve with Square Openings
• 31,5 mm Perforated Plate Sieve with Square Openings
• 63,0 mm Perforated Plate Sieve with Square Openings

DIN EN ISO 18846: Solid biofuels – Determination of fines content in quantities of pellets

➡ Details & Sieve Specifications

Specialty Sieves for Graded Wood Pellets (ISO 17225)

DIN 18946: Earth masonry mortar – Requirements, test and labelling

• 125 µm
• 250 µm
• 500 µm
• 1,00 mm
• 2,00 mm
• 4,00 mm
• 8,00 mm

DIN 19573: Mortar for construction and rehabilitation of drains and sewers outside buildings

• ref. DIN EN 12192-1

DIN 19557: Wastewater treatment plants – Mineral filter media and plastic media for percolating filters – Requirements, testing, delivery, placing

• 16,0 mm Perforated Plate Sieve with Square Openings
• 40,0 mm Perforated Plate Sieve with Square Openings
• 80,0 mm Perforated Plate Sieve with Square Openings

DIN EN ISO 19743: Solid biofuels – Determination of content of heavy extraneous materials larger than 3,15 mm

• 3,15 mm Round

DIN EN ISO 20200: Plastics – Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test

• 2,00 mm
• 5,00 mm

DIN ISO 20481: Coffee and coffee products – Determination of the caffeine content using high performance liquid chromatography (HPLC)

• 630 µm

DIN EN ISO 20541: Milk and milk products – Determination of nitrate content – Method by enzymatic reduction and molecular-absorption spectrometry after Griess reaction

• 500 µm

DIN EN ISO 20567: Paints and varnishes – Determination of stone-chip resistance of coatings – Part 1: Multi-impact testing

• 3,55 mm
• 4,00 mm
• 4,50 mm
• 5,00 mm

DIN EN ISO 20568: Plastics – Fluoropolymer dispersions and moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties

• 2,00 mm

DIN EN ISO 21078: Determination of boron(III) oxide in refractory products – Part 2: Acid extraction method for the determination of boron(III) oxide in binder components

• 106 µm
• 300 µm
• 6,70 mm

DIN ISO 21338: Water quality – Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test)

• 2,00 mm

DIN CEN ISO/TS 21596: Solid biofuels – Determination of grindability – Hardgrove type method for thermally treated biomass fuels

• 75 µm
• 500 µm
• 600 µm
• 1,18 mm

DIN EN ISO 21645: Solid recovered fuels – Methods for sampling

DIN EN ISO 21646: Solid recovered fuels – Sample preparation

DIN EN ISO 21656: Solid recovered fuels – Determination of ash content

• 1,00 mm

DIN 22019-1: Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution >20 µm by sieve-analysis

➡ Details & Sieve Specifications

Test Sieves for Raw Material Analysis in Coal Mining

DIN EN ISO 22766: Plastics – Determination of the degree of disintegration of plastic materials in marine habitats under real field conditions

• 2,00 mm

DIN EN ISO 23145: Fine ceramics (advanced ceramics, advanced technical ceramics) – Determination of bulk density of ceramic powders – Part 1: Tap density & Part 2: Untapped density

• 710 µm

DIN EN ISO 23319: Cheese and processed cheese products, caseins and caseinates – Determination of fat content – Gravimetric method

• 500 µm

DIN EN ISO 23343: Solid biofuels – Determination of water sorption and its effect on durability of thermally treated biomass fuels – Part 1: Pellets

• 3,15 mm Round

DIN EN ISO 24024: Plastics – Homopolymer and copolymer resins of vinyl chloride – Part 1: Designation system and basis for specifications & Plastics – Homopolymer and copolymer resins of vinyl chloride – Part 2: Preparation of test samples and determination of properties

• 63 µm

DIN EN 27941: Commercial propane and butane; analysis by gas chromatography

• 180 µm
• 250 µm

DIN 44872: Testing of electromagnesia

➡ Details & Sieve Specifications

Test Sieves for Screening Analysis of Metal Powders

DIN 51030: Testing of ceramic raw and basic materials – Determination of dry bending strength of unfired products

• 1,00 mm
• 2,00 mm

DIN 51717: Testing of solid fuels – Determination of mechanical strength of coke

• 10,0 mm Round
• 20,0 mm Round
• 40,0 mm Round
• 63,0 mm Round / 60,0 mm Round
• 80,0 mm Round
• 100,0 mm Round
• 120,0 mm Round
• 150,0 mm Round

DIN 51901: Testing of carbonaceous materials – Determination of density by the xylene method – Solid materials

• 63 µm

DIN 51916: Testing of carbonaceous materials – Determination of apparent density after tamping – Solid materials

• 1,00 mm
• 2,00 mm
• 3,15 mm
• 4,00 mm
• (250 µm)
• (500 µm)
• (4,00 mm)
• (8,00 mm)

DIN 51938: Testing of carbonaceous materials – Determination of particle size distribution by sieving – Solid matters

➡ Details & Sieve Specifications

Test Sieves for Carbonaceous Materials

DIN 51941: Testing of carbonaceous materials – Determination of chemical composition – Part 1: Sample preparation, solid materials, solid binders and impregnants

• 63 µm
• 1,00 mm

DIN 52096: Testing of filler for road construction – Stiffening effect of filler on bitumen – Stabilization index

• 90 µm

DIN 52098: Aggregates test methods – Determination of particle size distribution by wet sieving

• Ref. DIN 66165 and EN-933

DIN 52115-2: Test methods for aggregates – Part 2: Impact test on crushed and broken aggregates larger than 32 mm

• 8,00 mm
• 31,5 mm
• 40,0 mm

DIN EN ISO/ASTM 52925: Additive manufacturing of polymers – Feedstock materials – Qualification of materials for laser-based powder bed fusion of parts

DIN 53477: Testing of plastics – Determination of particle size distribution of moulding materials by dry sieving analysis

➡ Details & Sieve Specifications

Test Sieves for Monitoring of Moulding Materials

DIN 53583: Testing of pigments – Determination of fines content and of loss in mass by abrasion of pelletized carbon black pigments

• 125 µm

DIN 54407: Testing of ion exchange resins – Determination of bead size distribution

• 250 µm
• 315 µm
• 400 µm
• 500 µm
• 630 µm
• 710 µm
• 800 µm
• 1,00 mm
• 1,12 mm
• 1,25 mm
• 1,60 mm

DIN 55473: Auxiliary means of packaging – Desiccant in bag – Technical delivery conditions

• 250 µm
• 6,30 mm

DIN 55607: Pigments and extenders – Dispersion of pigments in powder coatings and their colorimetric evaluation after application

• 100 bis 125 µm

DIN 55625-4: Extenders for plastics – Part 4: Whiting, specifications and methods of test

• 45 µm

DIN 55625-5: Extenders for plastics – Part 5: Natural crystalline calcium carbonate (NCC), specifications and methods of test

• 45 µm

DIN 55625-6: Extenders for plastics – Part 6: Precipitated calcium carbonate (PCC), specifications and methods of test

• 45 µm

DIN 55625-7: Extenders for plastics – Part 7: Dolomite, specifications and methods of test

• 45 µm

DIN 55902: Pigments – Zinc chromate pigments, requirements and test methods

• 40 µm

DIN 55903: Pigments – Strontium chromate pigments, requirements and test methods

• 40 µm

DIN 55910: Pigments – Lithopone – Specifications and methods of test

• 45 µm

DIN 55923: Pigments; aluminium pigments and aluminium pigment pastes for paints; technical delivery specifications

• 40 µm
• 71 µm
• 160 µm

DIN 55968: Pigments – Industrial carbon blacks (lamp black, furnace black, gas black) – Requirements and methods of test

• 45 µm

DIN 58751-1: Production in optical engineering – Abrasives for optical engineering – Part 1: Requirements

• 50 µm
• 63 µm
• 71 µm
• 90 µm
• 100 µm
• 125 µm
• 140 µm
• 180 µm
• 200 µm
• 250 µm
• 355 µm

EAS 51: EAST AFRICAN STANDARD 51: Wheat grains — Specification

• 0.064 x 3/8 inch [1.63 x 9.53 mm] (Oblong)

ISO 605: Pulses; determination of impurities, size, foreign odours, insects, and species and variety; test methods

• Suitable test sieves with round or oblong apertures

ISO 622: Coal and coke – Determination of phosphorus – Reduced molybdophosphate photometric method

• 212 µm

ISO 1953: Hard coal – Size analysis by sieving

• 45 µm
• 63 µm
• 90 µm
• 125 µm
• 180 µm
• 250 µm
• 355 µm
• 500 µm
• 710 µm
• 1,00 mm
• 1,40 mm
• 2,00 mm
• 2,80 mm
• 4,00 mm
• 5,60 mm
• (6,30 mm)
• 8,00 mm
• (10,0 mm)
• 11,2 mm
• (12,5 mm)
• 16,0 mm
• (20,0 mm)
• 22,4 mm
• (25,0 mm)
• 31,5 mm
• (40,0 mm)
• 45,0 mm
• 50,0 mm
• 63,0 mm
• 75,0 mm
• (80,0 mm)
• 90,0 mm
• (100,0 mm)
• 125,0 mm

ISO 4150: Green coffee or raw coffee – Size analysis – Manual and machine sieving

• 2,80 mm Round
• 4,00 mm Round
• 4,75 mm Round
• 5,00 mm Round
• 5,60 mm Round
• 6,00 mm Round
• 6,30 mm Round
• 6,70 mm Round
• 7,10 mm Round
• 7,50 mm Round
• 8,00 mm Round
• 3,00 x 20,0 mm Oblong
• 3,55 x 20,0 mm Oblong
• 4,00 x 20,0 mm Oblong
• 4,50 x 20,0 mm Oblong
• 4,75 x 20,0 mm Oblong
• 5,00 x 30,0 mm Oblong
• 5,60 x 30,0 mm Oblong
• All Test Sieves with reduced tolerances.

ISO 5502: Oilseed residues; preparation of test samples

• 1,00 mm
• 2,80 mm

ISO 11377: Textile floor coverings – Floor soiling – Test site set-up and soiling evaluation

• 500 µm
• 710 µm

U.S. Code of Federal Regulations Title 7: Agriculture

• ^2.5⁄₆₄ in (0,992 mm) RL
• ⁴⁄₆₄ in (1,587 mm) RL
• ¹⁄₁₃ in (1,9 mm) RL
• ⁵⁄₆₄ in (1,98 mm) RL
• ⁶⁄₆₄ in (2,381 mm) RL
• ^6.5/₆₄ in (2,58 mm) RL
• ⁸⁄₆₄ in (3,175 mm) RL
• ⁵⁄₃₂ in (3,97 mm) RL
• ¹²/₆₄ in (4,76 mm) RL
• 1,00 mm QL
• ⁵⁄₆₄ in (1,98 mm) DL
• 0.064 x ³/₈ in (1,63 x 9,53 mm) SL
• ⁵⁄₆₄ x ³/₄ in (1,98 x 19,0 mm) SL
• ^5.5⁄₆₄ x ³/₄ in (2,18 x 19,0 mm) SL
• ⁶⁄₆₄ x ³/₄ in (2,38 x 19,0 mm) SL
• No. 30 Sieve (600 µm mesh)

United States of America – Grain & Dockage Test Sieves / Hand Sieves

United States Department of Agriculture & U.S. Code of Federal Regulations: Grain Sieve Requirements

Sieve Type	Perforation (mm)	Perforation (in)	Pitch (mm)	Pitch (in)	Pattern	Application
Slotted	0.71 x 11.91	0.028 x 15/32				Canola
Slotted	0.89 x 11.91	0.035 x 15/32				Canola
Slotted	1.00 x 11.91	0.0395 x 15/32				Canola
Oblong	1.19 x 9.53	3/64 x 3/8	3.18 x 10.93	0.125 x 0.430	End Stg.
Oblong	1.19 x 8.73	3/64 x 11/32	3.18 x 10.13	1/8 x 0.399	End Stg.	Flaxseed, Rye
Slotted	1.54 x 12.70	3.875/64 x ½	3.97 x 16.67	5/32 x 0.656	End Stg.
Oblong	1.63 x 9.53	.064 x 3/8	3.18 x 10.86	1/8 x 0.9	End Stg.	Flaxseed, Thin Oats, Rye, Wheat, Triticale
Oblong	1.79 x 12.70	4.5/64 x ½	3.97 x 14.29	5/32 x 0.563	End Stg.
Slotted	1.98 x 11.91	5/64 x 15/32	3.57 x 15.88	9/64 x 0.625	End Stg.
Slotted	1.98 x 19.05	5/64 x 3/4	4.76 x 23.02	3/16 x 29/32	End Stg.	Barley, Malting Barley, Oats, Wheat
Slotted	2.18 x 19.05	5.5/64 x 3/4	4.76 x 23.02	3/16 x 29/32	End Stg.	Malting Barley, Common Barley
Slotted	2.38 x 11.91	6/64 x 15/32	4.76 x 15.88	3/16 x 0.625	End Stg.
Slotted	2.38 x 19.05	6/64 x 3/4	4.76 x 23.02	3/16 x 29/32	End Stg.	Plump Barley
Slotted	2.58 x 11.91	6.5/64 x 15/32	4.76 x 15.88	3/16 x 0.625	End Stg.
Oblong	3.18 x 19.05	8/64 x 3/4	6.35 x 23.02	1/4 x 29/32	End Stg.	Soybeans
Oblong	3.57 x 19.05	9/64 x 3/4	6.35 x 23.02	1/4 x 29/32	End Stg.	Soybeans, Whole Beans
Slotted	3.97 x 19.05	10/64 x 3/4	7.14 x 23.02	9/32 x 29/32	End Stg.
Oblong	3.97 x 19.05	10/64 x 3/4	7.94 x 23.02	5/16 x 29/32	End Stg.	Soybeans, Whole Beans
Slotted	4.37 x 19.05	11/64 x 3/4	7.94 x 23.02	5/16 x 29/32	End Stg.	Whole Beans
Slotted	4.76 x 19.05	12/64 x 3/4	7.94 x 23.02	5/16 x 29/32	End Stg.	Whole Beans
Slotted	5.16 x 19.05	13/64 x 3/4	7.94 x 23.02	5/16 x 29/32	End Stg.
Slotted	5.56 x 19.05	14/64 x 3/4	11.11 x 23.02	0.125 x 29/32	End Stg.
Square	1.00	2.5/64				Forage Kochia Seeds
Triangle	1.98 ins.circle	5/64 ins.circle	6.35	1/4	Single	Barley, Oats, Thin Oats, Sorghum, Sunflower Seed
Triangle	2.26 ins.circle	.089 ins.circle	3.40	.134	Double
Round	0.99	2.5/64	1.91	.075	Stag.	Sorghum, Milled Rice, Split Peas
Round	1.19	3/64			Stag.	Corn
Round	1.79	4.5/64	3.18	1/8	Stag.	Flaxseed
Round	1.59	4/64	3.18	1/8	Stag.	Canola, Milled Rice, Sorghum, Pecans,
Round	1.95	1/13			Stag.	Seeds of Gras
Round	1.98	5/64	3.97	5/32	Stag.	Rye, Wheat, Barley, Pistachios
Round	2.12	1/12	3.18	1/8	Stag.	Wheat, Rye, Barley
Round	2.18	5.5/64	3.57	9/64	Stag.	Milled Rice
Round	2.38	6/64	3.97	5/32	Stag.	Barley, Corn, Rice, Milled Rice, Walnuts, Split Peas
Round	2.58	6.5/64	3.97	5/32	Stag.	Brown Rice, Milled Rice, Canola
Round	2.78	7/64	3.97	5/32	Stag.
Round	3.18	8/64	4.76	3/16	Stag.	Barley, Soybeans, Pecans, Almonds, Walnuts
Round	3.57	9/64	4.76	3/16	Stag.	Lentils
Round	3.97	10/64	5.56	7/32	Stag.	Sunflower Seeds, Split Peas
Round	4.76	12/64	6.35	1/4	Stag.	Corn, Pecans, Barley, Wheat, Rye, Sunflower Seeds, Lentils, Split Peas, Cotton Seeds
Round	5.56	14/64	7.94	0.125	Stag.
Round	5.95	15/64	7.94	5/16	Stag.	Lentils
Round	6.35	16/64	9.53	3/8	Stag.	Pistachios, Peanuts
Round	6.75	17/64	9.53	3/8	Stag.	Peanuts
Round	7.50	0.295			Stag.	Frozen Peas
Round	7.94	20/64			Stag.	Peanuts, Pecans, Almonds, Chick Peas
Round	8.20	0.32			Stag.	Frozen Peas
Round	8.75	0.34			Stag.	Frozen Peas
Round	9.53	24/64	13.49	17/32	Stag.	Pistachios, Walnuts, Pecans, Almonds
Round	10.20	0.40			Stag.	Frozen Peas
Round	11.11	28/64	15.08	19/32	Stag.	Pecans
Round	11.91	30/64	17.46	11/16	Stag.	Pistachios
Round	12.70	32/64			Stag.	Pecans
Round	13.49	34/64			Stag.	Hazelnuts
Round	13.89	35/64			Stag.	Hazelnuts
Round	14.29	36/64			Stag.	Pecans
Round	17.46	44/64			Stag.	Hazelnuts
Round	17.86	45/64			Stag.	Hazelnuts
Round	18.26	46/64			Stag.	French Plums
Round	18.65	47/64			Stag.	Hazelnuts
Round	19.05	48/64			Stag.	Hazelnuts
Round	19.45	49/64			Stag.	Hazelnuts
Round	22.22	56/64			Stag.	Non-French Plums, Hazelnuts
Round	23.81	60/64			Stag.	Walnuts
Round	28.97	73/64			Stag.	Walnuts
Round	29.36	74/64			Stag.	Walnuts
Round	30.18	76/64			Stag.	Walnuts
Round	30.56	77/64			Stag.	Walnuts
Round	38.10	96/64			Stag.	Walnuts
Round	1.98	.781	3.97	5/32	Stag.	Rice No. 5
Round	2.39	.0940	3.97	5/32	Stag.	Rice No. 6
Round	3.43	.1350	4.76	3/16	Stag.	Rice No. 0.135
Round	3.97	.1563	6.35	1/4	Stag.	Rice No. 10
Round	4.76	.1875	6.35	1/4	Stag.	Rice No. 12